VectorCut Generic Part Sheets


Generic Hand Wheel Sets in Laserboard. Superior glue and paint adhesion over etched brass, realistic proportional thicknesses. These are available in small medium and large formats. Each format has variations in size and armature width. These inexpensive parts add detail to industrial scenery, locomotive cabs, vehicles, artillery, etc., and may replace plastic or brass parts because they combine both thickness and finesse. Thickness may be doubled by simply gluing back to back. All wheels have a hole in the center for attaching to wire axles.


Handwheel Set Small in .01" Laserboard. Thickness can be doubled by gluing matching wheels back to back. Wheel diameters are approximately .08" / .12" /.14" / .15". Three formats in three sizes, plus typical small water faucet/spigot wheel in two sizes. Over 200 pieces!

$7.75 Free Postage!



Handwheel Set Medium in .015" Laserboard. Thickness can be doubled by gluing matching wheels back to back. Wheel diameters are approximately .25" and .28". Three configurations, in thick and thin formats, two diameters.

$6.75 Free Postage!



Handwheel Set Large in thick .020" Laserboard. Thickness can be doubled by gluing matching wheels back to back. Wheel diameters are approximately .34" and .45". Three configurations, two diameters. 42 pieces.

$13.50 Free Postage!




Generic Nuts Bolts and Washers sets in Laserboard. Superior glue adhesion over brass.



Thin Washers in fine 0.25mm (.01") laserboard material. Four sizes available. These can be used in conjunction with our Nuts Bolts and Washers sets as shown in this demo photo above. These inexpensive parts may serve many other purposes whenever a small precise O shape, ring or wheel is needed. Generous quantity per sheet.


Sheet of 2.3mm and 1.9mm washers. Can be used with both Vectorcut Nuts and Bolts sets.

$6.00 Free Postage!



Sheet of 1.75 mm and 1.45 mm washers. Can be used with the 1 mm / 1.5 mm Vectorcut Nuts and Bolts sets.

$5.50 Free Postage!



Nuts Bolts and Thick Washers. Durable laserboard material is easy to cut and has superior glue adhesion compared to brass. Available several sizes as follows. Thickness is .35mm / .014" Photo with US Dime is size reference, price is for one complete card. Generous quantity per sheet.


2mm Set

$7.50 Free Postage!



1mm and 1.5mm Set

$6 Free Postage!




Square Hole Grating Sheets. 2.5" x 1.4" of grating material per sheet, TWO sheets per packet. For ship hatches, grilles, porch skirts, sewer gratings and drain covers, under machine shop tools, etc. Holes are square, distance between holes matches size of the hole. Flexible Laserboard material can be easily stained, painted and glued. Will not delaminate or swell when exposed to water.


.03" Square Hole Grating, .0145" thick. Packet includes TWO sheets.

$6.75 Free Postage!



.025" Square Hole Grating, .0145" thick. Packet includes TWO full sheets.

$6.75 Free Postage!



.020" Square Hole Grating, .0145" thick. Packet includes TWO full sheets.

$6.75 Free Postage!



.015" Square Hole Grating, .01" thick. Packet includes TWO full sheets.

$6.75 Free Postage!



Be sure to check out our high quality HO Scale detail sets

The shopping cart buttons allow you to pay instantly by PayPal. If you wish to pay via Personal Check or Money Order, use the shopping cart to calculate your total and contact me at JKrakow@aol.com for further instructions.



www.VectorCut.com